2018 Exmark LAZER Z S-SERIES LZS850EKA724W0

Selling Price -

$6,300.00

One owner, well kept mower.

Information

2018 Exmark LAZER Z S-SERIES LZS850EKA724W0

LAZER Z S-SERIES

More power. More features. More productivity.

With the S-Series of zero turn riders, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available in 52, 60 or 72 inches. Want tough? Try a 10-gauge, formed and continuously seam-welded top and a 7-gauge side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.

Features may include:

DOING MORE WITH PROPANE

Our EFI system optimizes fuel delivery in real-time, which improves efficiency and performance. This, in combination with lower propane cost reduces operating expenses versus typical gas-powered mowers.

LESS TIME AT THE PUMP

Gas-powered S-Series models have a single 12-gallon tank with one fill location.

BUILT TO LAST

Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.

ON-BOARD DIAGNOSTICS

Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.

FEWER GREASE POINTS

With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.

ULTRACUT SERIES 4 DECK

This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

TOOL-LESS BELT REMOVAL

Deck and hydro belt can be installed without using any tools.

Photos

Highlights

  • $6,300.00
  • Milford, Delaware
  • Pre-Owned
  • 85078
  • 2018
  • Exmark
  • LAZER Z S-SERIES LZS850EKA724W0
  • Kawasaki
  • 29.5
  • 2072
  • Gas
  • Available
  • 84.9 in. (215.6 cm)
  • 70 in. (177.8 cm) | Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
  • 402369595
  • 72
  • Fabricated

Specifications

  • 2018
  • Exmark
  • LAZER Z S-SERIES
  • LZS850EKA724W0
  • Zero-Turn Mower
  • Model: FX850V | Series: V-Twin EFI
  • Kawasaki®
  • 3,750 RPM | Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
  • Heavy-duty canister air filtration system
  • Electronic Fuel Injected
  • 852
  • Gas EFI | Indicator: Yes - electronic Sender
  • Engagement: MagStop electromagnetic 250-ft-lb clutch with spot brake
  • Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
  • Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Lever-actuated disc brake.
  • 12-volt battery with 30-amp alternator.
  • .50" thick caster yoke arms.
  • Caster: 13 x 6.5-6, smooth-tread, semi-pneumatic.
  • Drive: 24 x 12-12, 4 ply Turf Master®
  • Deck: 72"
  • 70 in. (177.8 cm) | Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat.
  • 84.9 in. (215.6 cm)
  • 86.1 in. (218.7 cm)
  • 12-gallon (45.4-L), single tank with single fill location.
  • Cup Holder: Standard | Drive: Hydro-Drive | Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | ROPS: 2-post foldable ROPS standard with seat belt and latch. | Drive Wheel Release: Allows unit movement without engine running. | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. | Onboard Intelligence: RED Technology
  • Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • 3 Blades at 24.50" Length | Blade Spindles: No maintenance, sealed and non-greasable spindles; 7.75"-diameter cutter housing with 25mm (.98") diameter spindle shaft and splined blade driver.| Blade Tip Speed: Approximately 18,500 fpm.
  • Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • 402369595
  • 72
  • Fabricated