2024 Exmark Lazer Z S-Series LZS749AKC604A1

Selling Price -

Click for a Quote

Information

2018 Exmark LAZER Z S-SERIES LZS749AKC604A1

LAZER Z S-SERIES

More power. More features. More productivity.

With the S-Series of zero turn riders, you can choose from eight different engines, including an eco-friendly, Electronic Fuel Injection (EFI), propane option. Four UltraCut™ Series 4 cutting deck sizes are available in 52, 60 or 72 inches. Want tough? Try a 10-gauge, formed and continuously seam-welded top and a 7-gauge side skits. All with welded spindle mounting sites and full-floating 4-point suspension with four adjustable anti-scalp rollers.

Features may include:

DOING MORE WITH PROPANE

Our EFI system optimizes fuel delivery in real-time, which improves efficiency and performance. This, in combination with lower propane cost reduces operating expenses versus typical gas-powered mowers.

LESS TIME AT THE PUMP

Gas-powered S-Series models have a single 12-gallon tank with one fill location.

BUILT TO LAST

Want tough? Try a 10-gauge, formed and continuously seam-welded top, and a 7-gauge side skirt. All with welded spindle mounting sites. And, full-floating, 4-point suspension with four adjustable anti-scalp rollers.

ON-BOARD DIAGNOSTICS

Check vital functions at a glance on the digital screen. An electronic fuel gauge with low fuel warning on all Lazer Z units, battery voltage warning, hour meter and OPC safety switch monitoring make troubleshooting easy.

FEWER GREASE POINTS

With just four grease points that only need annual greasing, the Lazer Z delivers maximum performance with minimum maintenance. Greaseless spindles and only four grease points on the entire machine.

ULTRACUT SERIES 4 DECK

This full-floating deck uses maintenance free spindle with a splined blade driver to stop bolt tightening on impacts. And, our patented bearing design on idler arm pivots only needs annual service.

TOOL-LESS BELT REMOVAL

Deck and hydro belt can be installed without using any tools.

Photos

Highlights

  • Milford, Delaware
  • New
  • 85013
  • 2024
  • Exmark
  • Lazer Z S-Series LZS749AKC604A1
  • Electronic Fuel Injected
  • Gas
  • Available
  • 72.8 in. (184.9 cm)
  • Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. | 70.5 in. (179.1 cm)
  • 60
  • Fabricated
  • Kohler

Specifications

  • 2024
  • Exmark
  • Lazer Z S-Series
  • LZS749AKC604A1
  • Zero-Turn Mower
  • Model: ECV749 | Series: Command™ EFI | Spec: 3064
  • Heavy-duty canister air filtration system
  • 747
  • Kohler
  • 3,750 RPM
  • Fuel Indicator: Electronic Sender
  • Gas EFI
  • Engagement: MagStop electromagnetic 200-ft-lb clutch with spot brake
  • Hydro-Drive | Description: Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, 1.7-quart integrated reservoir, spin-on filter and heavy-duty components. 12 cc pumps and 14. 5 cubic inch motors.
  • Control: Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.
  • Lever-actuated disc brake.
  • 24 x 12-12, 4 ply Turf Master® | Caster: 13 x 6.5-6, smooth-tread, semi-pneumatic.
  • 24 x 12-12, 4 ply Turf Master®
  • 12-volt battery with 20-amp alternator.
  • Infinitely variable speed selection from 0–10.0 mph (16 kmph) forward, 0–6.0 mph (9.7 kmph) reverse.
  • Blade: Approximately 18,500 fpm.
  • Tractor: Unibody, welded, heavy-duty 1.5" x 3" tubular steel.
  • Package: Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators.
  • Casters: .50" thick caster yoke arms.
  • Blade Cutter Housing: 7.75" | Blade Shaft: 25mm (.98")
  • Deck: 60"
  • Cutting: 1.0" (2.5 cm) to 5.5" (11.8 cm) in 0.25" (0.64 cm) increments adjustable from operator’s seat. | 70.5 in. (179.1 cm)
  • Blades: 3 Blades at 20.50" | 83.1 in. (211.1 cm)
  • 72.8 in. (184.9 cm)
  • 12-gallon (45.4-L), single fuel tank with single fill location.
  • Curb: 1177 lbs
  • Smart Controller | Engine hour meter and cup holder | UPC: 193308000572 | Carb Compliant | Deck Lift: Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. | ROPS: 2-post foldable ROPS standard with seat belt and latch. | Drive Wheel Release: Allows unit movement without engine running. | Deck Style: Floating Deck | Deck Style Description: Full-floating UltraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch.
  • Deluxe, two-tone, bolstered suspension seat with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.
  • 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight.
  • 60
  • Fabricated
  • Kohler